Voltmeter Module with 7-Segment 0.28 inch 0-100V (3 Wires)
Mini voltmeter module with 0.28 inch display, which can display a voltage between 0 and 100VDC.
It is provided with 3 wires, two for power and the third for voltage measurement. Attention , the supply voltage is between 4 and 30 VDC . The supply is made through the Red and Black wires. The third wire (White or Yellow, depending on the batch) will be placed on the Cathode (+), which actually measures the voltage. To work, it is necessary that the circuit has a common GND.
The module has mounting ears. of 33mm.
The decimal point moves automatically.
Specifications:
- Supply voltage: 2.5 – 30VDC
- Measured voltage: 0 – 100VDC
- Operating current: <20mA
- Display: 3 characters with a decimal point, digital tube
- Display size: 0.28 inch
- Display color: Green or Red (According to your choice)
- Refresh rate: 200ms
- Accuracy: +-1% declared. From the tests, at low voltages there is a gap of up to 0.4V.
- Operating temperature: -10 – 65 degrees C
- Dimensions mm: 33 x 10.7 x 7.5mm (ears included)
- Wire length: 10cm approximately
- Number of threads: 3
Wiring
- Lead Length: 15cm
- Red: Power supply + (positive)
- Black: Power supply – (negative)
- Yellow/White: Sense (voltage sense wire).
Alternative Products
These other products might interest you